 |
|
|
|
|
|
| The SURE SHOT - ATOMISER SPRAYERS will
provide a uniform spray of most light liquids - without CFC's, freon, or
other potentially dangerous propellants. Instead, these sprayers use readily
available compressed air as the propellant. They are as easy to use as
an aerosol - just point and spray. And, they are refillable
and rechargeable. You never 'run out' of air. If you run out of product
or want to change liquids, just depressurize, refill, close and recharge.
It's that simple!
YOU CAN HELP THE ENVIRONMENT by using environmentally safe air, not abusing it with additional possible harmful chemicals found in most propellants. YOU CAN SAVE MONEY by purchasing less expensive bulk liquids, not expensive aerosols. Remember, you're paying for propellant and packaging. CHOOSING THE CORRECT SPRAYER IS EASY. Just answer a couple of easy questions. Is the liquid water soluble? If yes, choose a Brass, Aluminium of Stainless Steel unit. If no, then you can use a Steel unit. Just specify the size you want (1 qt., 16 oz., or 8 oz.) and the type of spray pattern fixed or adjustable. That's all there is to it. SURE SHOT SPRAYERS Model A and B are available in 1 quart, 16 ounce or 8 ounce fluid capacity sizes. They are constructed to industrial commercial specifications. Internal working parts are made of corrosion resistant material. |
|
|
| Unit shown above is A SURE SHOT model 'A'
32 oz. capacity sprayers of Chrome plated Brass construction - If specified
at time of order they can be fitted with Viton* seals to render them suitable
for the spraying of volatile solvents.
* Viton is a tradename of DuPont SURE SHOT ATOMlZERS are available in 16 ounce and 8 ounce fluid capacity containers. The units are the same diameter as a large size aerosol can and can be used easily by everyone. |
 |
|
| Units shown above are SURE SHOT model 'B'
8 oz. capacity sprayers of Stainless Steel construction - If specified
at time of order they can be fitted with Viton* seals to render them suitable
for the spraying of volatile solvents.
These unique sprayers use replaceable aerosol type nozzles and valves, so, should the nozzle clog or the valve breakdown, just remove and replace. Each atomiser comes with an extra nozzle and valve. The wetted parts are corrosion resistant. (Plastic or Chrome Plated Brass). The sprayers come with a general purpose spray nozzle. |
 |
NOZZLE NO. 301
Solid Pin Stream. For applications where "splash" coverage is preferred or deeper penetration is required (such as penetrating & o lubricating oils, insecticide etc.). Ideal for distant or inaccesible areas. Effective range up to 20 feet. |
 |
NOZZLE NO. 302
Standard Solid Cone, medium density |
 |
NOZZLE NO. 302-B
Solid Cone Pattern, heavy density. For use where heavier coverage is preferred such as whitewall tyre cleaner & machinery cleaner. |
 |
NOZZLE NO. 302-C
Solid Cone Pattern, extra fine density. For use where light coverage with a fine mist is preferred - such as marking dyes and inks. |
 |
NOZZLE NO. 305
Solid Cone Pattern, fine density. For use with lighter liquids and applications that require extra uniformity such as mould release agents and dry cleaning fluids. |
 |
NOZZLE NO. 501
Flat fan-shaped pattern, medium to heavy density. For applications that require a uniform film over a large area such as insecticides, baker's trough grease, etc. Handles heavier viscosity liquids more effectively. |
 |
NOZZLE NO. 602
Adjustable plastic spray nozzle, permits finger-tip regulation of spray from extra fine mist to pin stream. Should not be used with materialsthat are harmfulto plastics. |
 |
NOZZLE NO. 707
Solid Cone Pattern, extra fine full pattern for use with most liquids and some paints. Will spray some heavier type liquids. |
 |
 |
 |
 |